Section 2-成品區域劃分及狀態標識管理 Finish Goods Area Layout & Labeling Management

2.1供應商內部成品檢驗區域要包含如下區域并用不同顏色標識框:

Vendor internal finishing good area for inspection purpose should include below areas with different color identification:

2.1.1檢驗區 Inspection Area

2.1.2待檢區 Waiting for Inspection Area

2.1.3檢驗合格區 Inspection Passed Area

2.1.4檢驗不合格區 Inspection NG (Not Good) Area

2.2供應商內部檢驗完成的成品按 LOT 放置需要有如下的狀態標識且標識內容包括 PO#信息，機種名稱, 數量，批準，原因備注等; 請參考附錄-Inspected lots of finishing good by vendor internal quality check must have below identified status with PO# information, model number, Q’ty, Approved by, remark informaiont etc.:

2.2.1合格 PASS

2.2.2不合格 REJECT

2.2.3待處理 PENDING

2.3成品倉庫區域劃分(備注-只有供應商內部檢驗合格的產品才能入庫成品倉):

Finshing good warehouse layout requriement (Only finishing good passed vendor’s internal quality check can be deliveried to FG warehouse:

2.3.1待客驗區域 Area by Waiting for Customer Inspection

2.3.2待客確認出貨區域 Area by Waiting for Customer Approve Shipment

2.4成品倉庫成品狀態標識 -成品按 LOT 放置需要有如下的狀態標識且標識內容包括 PO#信息，機種名稱,數量等; 請參考附錄-

Inspected lots of finishing good by vendor internal quality check must have below identified status withPO# information, model number, Q’ty, Approved by, remark informaiont etc.:

2.4.1客驗批準合格 Customer judgement is PASS

2.4.2客驗判定不合格 Customer judgement is NG

2.4.3客驗判定待處理 Customer judgement is Pending